Complete water treatment for cooling, boiler feed, FGD wastewater, and ash handling in thermal power stations.
Water and wastewater treatment for fgd wastewater treatment. Cooling, boiler feed and effluent compliance for power generation.
Cooling water treatment for power plants. Filtration, chemical dosing, side-stream treatment and blowdown management.
Oil and gas wastewater treatment for natural gas combined cycle.
Water and wastewater treatment for power generation water treatment.
Coal-fired power plants require comprehensive water treatment for multiple applications including cooling water, boiler
Every system is designed for your specific wastewater characteristics, flow profile, and effluent targets. No off-the-shelf assumptions — just validated process engineering.
Equipment selected from manufacturers with proven field performance in similar applications. Duty/standby arrangements and robust construction minimise unplanned downtime.
Design targets are set at 50-70% of consent limits, providing a safety margin for process variation. Continuous monitoring and automated reporting demonstrate compliance.
Intuitive controls, clear instrumentation, and accessible maintenance points reduce training requirements. Standard operating procedures written in plain language.
Direct access to our process engineers for operational advice, troubleshooting, and optimisation. Remote diagnostics and rapid on-site response keep your plant running.
Materials certified to EN 10204 3.1, welding procedures qualified to ISO 9606, and pressure testing to 1.5x design pressure. Full traceability from mill to commissioning.
Our coal plant water treatment includes clarification and filtration for cooling water, pre-treatment for boiler feed, m
Every system is designed for your specific wastewater characteristics, flow profile, and effluent targets. No off-the-shelf assumptions — just validated process engineering.
Equipment selected from manufacturers with proven field performance in similar applications. Duty/standby arrangements and robust construction minimise unplanned downtime.
Design targets are set at 50-70% of consent limits, providing a safety margin for process variation. Continuous monitoring and automated reporting demonstrate compliance.
Intuitive controls, clear instrumentation, and accessible maintenance points reduce training requirements. Standard operating procedures written in plain language.
Direct access to our process engineers for operational advice, troubleshooting, and optimisation. Remote diagnostics and rapid on-site response keep your plant running.
Materials certified to EN 10204 3.1, welding procedures qualified to ISO 9606, and pressure testing to 1.5x design pressure. Full traceability from mill to commissioning.
Treatment systems ensure compliance with cooling water, boiler feed, and wastewater discharge requirements while maximis
We manage discharge permit applications, amendments, and renewals. Environmental regulators trust our data and engineering credibility, speeding approvals.
Effluent sampling follows ISO and national standards. Third-party laboratory analysis provides defensible data for regulatory submissions and legal defence.
Continuous data logging, calibration records, and maintenance logs are organised for instant retrieval. Environmental audits become routine, not stressful events.
We design for 50-70% of the consent limit, not 100%. This safety margin absorbs process upsets, seasonal variation, and instrument drift without breach.
Performance guarantees with financial backing shift liability from your balance sheet to ours. Insurance and bonding protect against worst-case scenarios.
Design, fabrication, and commissioning follow ISO, EN, and industry-specific standards. Documentation packages satisfy due diligence for lenders and insurers.
Treat ash transport and handling water from coal and biomass power plants.
View PagePower plants require extensive water treatment for boiler feed, cooling systems, flue gas desulphurisation (FGD), and wastewater discharge. Our solutions address the specific challenges of coal, gas, and renewable power generation including high-purity water for turbines, zero liquid discharge options, and treatment of FGD effluent containing heavy metals and chlorides.
Demineralisation and reverse osmosis produce high-purity water for steam generation.
Circulating water treatment controls scaling, corrosion, and biofouling in condensers.
Tertiary treatment removes mercury, selenium, arsenic, and TDS from scrubber blowdown.
Evaporation and crystallisation systems eliminate wastewater discharge from power plants.
| Boiler Feed TDS | <0.1 mg/L (supercritical units) |
| Cooling Water Circulation | Up to 300,000 m³/h (large thermal stations) |
| FGD Wastewater Flow | 0.5 – 3% of flue gas volume |
| Heavy Metals | <0.05 mg/L Hg, <0.01 mg/L Se |
| TDS in ZLD Brine | Up to 350,000 mg/L |
| Make-up Water | 1 – 5% of circulation (evaporative cooling) |
| Blowdown Recovery | 80 – 95% recovery via RO and evaporation |
| Materials | Super duplex, titanium, FRP (chloride resistance) |
Emission Limit Values for large combustion plants drive FGD wastewater treatment requirements.
IED 2010/75/EU BAT requirements for power plant wastewater and cooling water.
US EPA 40 CFR Part 423 compliance for steam electric power generating wastewater.
Our experts can design a system tailored to your specific requirements.
Our expertise spans multiple industries with sector-specific water treatment solutions.