Water treatment for concentrated solar power (CSP), geothermal plants, and biomass power facilities.
Coal-fired power plant wastewater treatment. Flue gas desulphurisation, ash handling water and cooling tower blowdown.
Water and wastewater treatment for fgd wastewater treatment. Cooling, boiler feed and effluent compliance for power generation.
Cooling water treatment for power plants. Filtration, chemical dosing, side-stream treatment and blowdown management.
Oil and gas wastewater treatment for natural gas combined cycle.
Renewable energy facilities including CSP, geothermal, and biomass plants require water treatment for cooling, steam gen
Every system is designed for your specific wastewater characteristics, flow profile, and effluent targets. No off-the-shelf assumptions — just validated process engineering.
Equipment selected from manufacturers with proven field performance in similar applications. Duty/standby arrangements and robust construction minimise unplanned downtime.
Design targets are set at 50-70% of consent limits, providing a safety margin for process variation. Continuous monitoring and automated reporting demonstrate compliance.
Intuitive controls, clear instrumentation, and accessible maintenance points reduce training requirements. Standard operating procedures written in plain language.
Direct access to our process engineers for operational advice, troubleshooting, and optimisation. Remote diagnostics and rapid on-site response keep your plant running.
Materials certified to EN 10204 3.1, welding procedures qualified to ISO 9606, and pressure testing to 1.5x design pressure. Full traceability from mill to commissioning.
Our renewable energy treatment systems address specific needs: high-purity water for CSP steam generation, silica remova
Every system is designed for your specific wastewater characteristics, flow profile, and effluent targets. No off-the-shelf assumptions — just validated process engineering.
Equipment selected from manufacturers with proven field performance in similar applications. Duty/standby arrangements and robust construction minimise unplanned downtime.
Design targets are set at 50-70% of consent limits, providing a safety margin for process variation. Continuous monitoring and automated reporting demonstrate compliance.
Intuitive controls, clear instrumentation, and accessible maintenance points reduce training requirements. Standard operating procedures written in plain language.
Direct access to our process engineers for operational advice, troubleshooting, and optimisation. Remote diagnostics and rapid on-site response keep your plant running.
Materials certified to EN 10204 3.1, welding procedures qualified to ISO 9606, and pressure testing to 1.5x design pressure. Full traceability from mill to commissioning.
Water treatment supports the sustainability goals of renewable energy by maximising water reuse, minimising consumption, and protecting receiving waters.
Every system is designed for your specific wastewater characteristics, flow profile, and effluent targets. No off-the-shelf assumptions — just validated process engineering.
Equipment selected from manufacturers with proven field performance in similar applications. Duty/standby arrangements and robust construction minimise unplanned downtime.
Design targets are set at 50-70% of consent limits, providing a safety margin for process variation. Continuous monitoring and automated reporting demonstrate compliance.
Intuitive controls, clear instrumentation, and accessible maintenance points reduce training requirements. Standard operating procedures written in plain language.
Direct access to our process engineers for operational advice, troubleshooting, and optimisation. Remote diagnostics and rapid on-site response keep your plant running.
Materials certified to EN 10204 3.1, welding procedures qualified to ISO 9606, and pressure testing to 1.5x design pressure. Full traceability from mill to commissioning.
Treat ash transport and handling water from coal and biomass power plants.
View PagePower plants require extensive water treatment for boiler feed, cooling systems, flue gas desulphurisation (FGD), and wastewater discharge. Our solutions address the specific challenges of coal, gas, and renewable power generation including high-purity water for turbines, zero liquid discharge options, and treatment of FGD effluent containing heavy metals and chlorides.
Demineralisation and reverse osmosis produce high-purity water for steam generation.
Circulating water treatment controls scaling, corrosion, and biofouling in condensers.
Tertiary treatment removes mercury, selenium, arsenic, and TDS from scrubber blowdown.
Evaporation and crystallisation systems eliminate wastewater discharge from power plants.
| Boiler Feed TDS | <0.1 mg/L (supercritical units) |
| Cooling Water Circulation | Up to 300,000 m³/h (large thermal stations) |
| FGD Wastewater Flow | 0.5 – 3% of flue gas volume |
| Heavy Metals | <0.05 mg/L Hg, <0.01 mg/L Se |
| TDS in ZLD Brine | Up to 350,000 mg/L |
| Make-up Water | 1 – 5% of circulation (evaporative cooling) |
| Blowdown Recovery | 80 – 95% recovery via RO and evaporation |
| Materials | Super duplex, titanium, FRP (chloride resistance) |
Emission Limit Values for large combustion plants drive FGD wastewater treatment requirements.
IED 2010/75/EU BAT requirements for power plant wastewater and cooling water.
US EPA 40 CFR Part 423 compliance for steam electric power generating wastewater.
Our experts can design a system tailored to your specific requirements.
Our expertise spans multiple industries with sector-specific water treatment solutions.