Submersible Borehole
| Identification | |
| Manufacturer | Franklin |
| Series | Submersible |
| Model / size | FE 4-inch 1HP |
| Pump type | Submersible Borehole |
| Spec code | PS-SM-029 |
| Duty & power | |
| Min flow | 1 m³/hr |
| Max flow | 3 m³/hr |
| Min head | 20 m |
| Max head | 80 m |
| Max power | 0.75 kW |
| NPSHr | 0.8 m |
| Efficiency at BEP | 55 % |
| Drive & electrical | |
| Starting method | DOL (Direct On Line) — up to 3kW |
| VFD compatible | Yes (10-60 Hz, soft start recommended) |
| Motor IE class | IE2 (mandatory) |
| Insulation class | Class F (155°C) standard |
| IP rating | IP68 |
| Materials & sealing | |
| Casing | SS 304 |
| Impeller | SS 304 |
| Shaft | SS 304 |
| Seal type | Mechanical Seal |
| API seal plan | Plan 11 / Plan 13 (vent) — canned motor, no external seal |
| Application | |
| Service | Potable Water, Domestic Well |
| Key features | 4 inch submersible, small capacity |
A complete, shareable page for a single pump. It plots the performance curve (head, efficiency and NPSHr against flow, with the best-efficiency point marked, or dosing flow against stroke), decodes the API 682 / ISO 21049 mechanical seal plan, and lists the full specification — duty and operating range, drive and motor, materials of construction, build and reliability, connections, weight and certifications. Pop-up panels give the type-specific preventive-maintenance schedule (daily to annual tasks with procedures) and a troubleshooting guide (symptoms, probable causes and recommended solutions).
Run a centrifugal pump near its BEP and keep dosing pumps in their recommended stroke band. Data is from the engineering reference database — confirm against the manufacturer's certified curve before procurement.
Our expertise spans multiple industries with sector-specific water treatment solutions.
Explore closely-related tools, references and guides
Send your influent analysis and our engineers assess your process and recommend a tailored treatment solution — free, confidential and no obligation.
Select the regulatory standard for your country — it sets which parameters we need for a compliance-aware process assessment.
Required parameters for the chosen standard are flagged on the sample form. You can still submit a partial set and we will advise what else to test.
Your sample is stored against your company so we can track the project. Provide a company name or email as a minimum.