A screw press for sludge dewatering with low water and energy use — producing a high-dry-solids cake that cuts haulage and disposal cost.
CFD, P&ID, SCADA and commissioning for critical water treatment plants.
Plant layouts, piping isometrics and construction-ready engineering drawings.
Flow, mixing and thermal CFD across treatment and process equipment.
Full mechanical, physico-chemical, biological and sludge equipment range.
Device is used for dehydration of sludge coming from waste water treatment. Multidisc press allows achieving same effects as with decanters or belt press, but with much lower water and energy consumption.
The screw press uses a combination of gravity drainage and mechanical compression to dewater sludge. The multidisc design provides multiple stages of dewatering, progressively increasing the solids content.
Our screw press systems are engineered for continuous operation with minimal operator intervention. The slow rotation speed ensures gentle treatment of the sludge while achieving high dryness levels.
This treatment stage is engineered to achieve specific contaminant removal targets while providing stable, predictable performance across variable inlet conditions. Design parameters are calculated from wastewater characterisation data, regulatory requirements, and site-specific constraints including footprint, energy availability, and operator capability.
Design validated by CFD modelling and pilot testing to confirm performance guarantees.
Equipment selected for 20-year design life with minimal wearing parts and easy access.
Automated dosing and feedback control minimise reagent consumption and sludge production.
Online monitoring and data logging demonstrate continuous consent compliance.
| Design Flow | 10 – 5,000 m³/h (application specific) |
| Inlet Variability | Designed for 1:3 peak-to-average flow ratio |
| Removal Efficiency | 85 – 99% depending on target contaminant |
| Hydraulic Retention | Calculated from kinetic constants and safety factors |
| Power Consumption | 0.5 – 5.0 kWh/100 m³ (process dependent) |
| Chemical Dose | Auto-controlled based on online analysers |
| Sludge Production | 0.2 – 1.5 kg DS/kg contaminant removed |
| Materials | SS304, SS316L, or carbon steel with coating |
No treatment stage operates in isolation. This process is designed to receive conditioned influent from upstream stages and deliver effluent quality suitable for downstream processes. Hydraulic and organic loading rates are balanced across the complete treatment train to prevent bottlenecking and ensure overall plant efficiency. Our engineers model the complete flowsheet to optimise Capital expenditure and Operating expenditure across the plant lifecycle.
Screening, equalisation, and pre-treatment protect this stage from damage and overload.
Effluent quality ensures downstream biology, filtration, or disinfection performs optimally.
Reject streams, filtrate, and centrate are routed back to appropriate upstream points.
Contact Our Engineers to discuss your sludge dewatering requirements and get a customised quotation.
Our expertise spans multiple industries with sector-specific water treatment solutions.